Learn how to build a curbless shower and waterproof shower walls. We used Laticrete Hydro Ban Board to make this fast and easy.

Simplify the craft of building custom bathrooms with our video library

We used these supplies

Hydro Ban Board — https://bit.ly/2CPkSES
Hydro Ban Sealant — https://amzn.to/2RwfoH7
Hydro Ban Board Screws — https://amzn.to/2CPNXQC
Alkali Resistant Mesh — https://amzn.to/2RCDyQA
Corner Putty Knife — https://amzn.to/2C6IVxk
Fein Multi Tool — https://amzn.to/2CPldHE
Utility Knife — http://amzn.to/1RWUS7f
4 Foot Level — http://amzn.to/1qoC5vE
Caulking Gun — http://amzn.to/1RFZUG2
Impact Driver — http://amzn.to/1qoCgHs
Measuring Tape — http://amzn.to/1RG068a
Spade Bit — http://amzn.to/1qoCiz1


Today we’ll show you how to waterproof the walls inside a curbless shower. We used Laticrete’s Hydro Ban Board. This makes waterproofing shower walls easy and fast.

Hydro Ban Boards can be cut with a utility knife or oscillating multi tool. Studs need to be 16″ on-center for 1/2″ boards.

In our prior video we installed the VIM curbless shower pan, https://youtu.be/vhr7eB9fBI4

Apply a bead of hydro ban sealant to the shower pan then set the Hydro Ban Board in that and flush with the stud wall.

Use Hydro Ban Board screws every 12″ on-center to secure the boards to studs.

There are a ton of details in our video, including tips for waterproofing around a window.

Check out the video here


If you want the complete written tutorial you can see that over on Home Repair Tutor


Learn how to simplify the craft of building custom bathrooms with our online video library over on Bathroom Repair Tutor